Abstracts – Browse Results
Click on the titles below to expand the information about each abstract.
Viewing 22 results ...
Ali, S (2022) Identification of key factors that aid the decision on whether to refurbish-reuse or demolish-rebuild existing and newly designed buildings and highways, Unpublished PhD Thesis, , London South Bank University.
Barrett, P (1989) Practice management in selected construction-related professions, Unpublished PhD Thesis, , London South Bank University.
Daoud, A O E (2021) Materials procurement conceptual framework for minimising waste in the Egyptian construction industry, Unpublished PhD Thesis, , London South Bank University.
Dejahang, F (2004) Determinants of productivity on construction sites, Unpublished PhD Thesis, , London South Bank University.
Ganiyu, S (2021) Developing a Bim-Knowledge (Bim-K) framework for improved decision-making in building construction projects, Unpublished PhD Thesis, , London South Bank University.
Ibrahim, M N (2022) Risk management in construction of megahousing projects in Egypt, Unpublished PhD Thesis, , London South Bank University.
Islam, M Z (2018) Resourcing for post-disaster housing reconstruction: the case of Cyclones Sidr and Aila in Bangladesh, Unpublished PhD Thesis, School of Law and Social Sciences, London South Bank University.
Kolawole, O M (2023) A model for improving ethics in construction materials and products supply chain using blockchain, Unpublished PhD Thesis, , London South Bank University.
Madanayake, U (2021) Digitalisation to improve organisational competitive advantage: a study on BBI exploitation, Unpublished PhD Thesis, , London South Bank University.
Mansell, P R (2021) Measuring infrastructure projects sustainable development goals impact (MISI), Unpublished PhD Thesis, , London South Bank University.
Onyia, U (2019) Improving the supervisory and managerial skills and competences required in construction management in Nigeria, Unpublished PhD Thesis, School of the Built Environment and Architecture, London South Bank University.
Oyenuga, A (2016) Economic and environmental impact assessment of construction and demolition waste recycling and reuse using LCA and MCDA management tools, Unpublished PhD Thesis, School of the Built Environment and Architecture, London South Bank University.
- Type: Thesis
- Keywords: case study; decision making; demolition; effectiveness; environmental impact; life cycle analysis; markets; materials; new build; policy; recycling; reuse; waste management
- ISBN/ISSN:
- URL: https://doi.org/10.18744/PUB.001810
- Abstract:
Reuse and recycling of waste from construction and demolition (C&D) is problematic because the markets for secondary materials have not yet been fully integrated. Decisions regarding the reuse and recycling of building waste materials, however, are beneficial economically to the construction industry, in addition to having environmental and social responsibility outcomes. The aim of this thesis is to evaluate the economic and environmental benefits of recycling and reuse of C&D waste. It explores how impact categories such as economic and environmental impact can be used to develop a decision-support framework for recycling and reusing building waste. Two case studies of real-life Demolition and New Build projects are selected to demonstrate how waste inventory data can be collected and adopted to support the decision-making process. A thorough review of the available literature revealed a holistic view of C&D waste management and its related economic and environmental impacts. The literature review helped establish a direction for what is needed to develop a decision-support framework. Two management tools (LCA and MCDA) were identified as possible tools needed to complete the decision-support framework. Life Cycle Analysis (LCA) and Analytic Hierarchical Process (AHP) (an aspect of MCDA) were adopted to construct the framework, which was to be applied to the case study’s waste management system. The combination of these two management tools enables the full development of a framework that can measure both the economic and environmental impact of the current waste management system, as well as act as a tool for supporting decisions regarding different policy alternatives. Thus, the framework was applied to the Demolition and New Build case studies, and later validated for consistency. The framework delivered a set of positive results that could be useful for those making decisions on policy alternatives. Both the decision making process and waste management policy were selected and facilitated by the new framework. Decision makers' preferences on policy alternatives were ranked as final outcomes, and favoured reducing, recycling and reusing opportunities in C&D waste management. The result depicts an approach that, compared to current waste management practices, demonstrates a strong acceptability in terms of the environment and cost-effectiveness. Thus, the key findings discussed here provide an interesting foundation for future research, which will focus more on other impacts, such as the social and policy impacts of recycling and reusing C&D waste.
Poh, Y P (2005) Knowledge-based integrated project duration-cost risk simulation model, Unpublished PhD Thesis, School of the Built Environment and Architecture , London South Bank University.
Pritchard, C R (1999) Access to construction work and resources in Zimbabwe: An institutional analysis of the development of the construction industry, Unpublished PhD Thesis, , London South Bank University.
Robinson, H S (2000) A critical systems approach to infrastructure investment and resource management in developing countries, Unpublished PhD Thesis, , London South Bank University.
Shahparvari, M (2023) Minimisation of rework in UK housing construction: contribution of subcontractors, Unpublished PhD Thesis, , London South Bank University.
Tam, G C K (2018) Managing project sustainability: a study of the construction industry in Hong Kong, Unpublished PhD Thesis, LSBU Business School, London South Bank University.
Thompson, E T (1997) A rational approach to computer integration in construction, Unpublished PhD Thesis, , London South Bank University .
Umar, T (2020) Developing toolkits and guidelines to improve safety performance in the construction industry in Oman, Unpublished PhD Thesis, School of Built Environment and Architecture, London South Bank University.
Walker, G (1999) A critical analysis into the factors that determine project management success: The case in railway engineering projects, Unpublished PhD Thesis, , London South Bank University.
Wirba, E N (1996) An object-oriented knowledge-based systems approach to construction project control, Unpublished PhD Thesis, , London South Bank University.
Wong, F K W (2000) Construction safety in Hong Kong: The development of models for the safety performance assessment of major contractors, Unpublished PhD Thesis, , London South Bank University.